Carbon capture could play a central role in keeping greenhouse gas emissions out of the atmosphere so many materials are being tested for the purpose of capturing CO₂. 
New results show that ordinary clay can work just as effectively as more advanced materials. Clay offers many benefits compared to other materials, particularly because other potential materials can be expensive, difficult to produce, toxic and not particularly environmentally friendly. A possible practical future use of this discovery could be to include clays in CO₂ filters for industrial-scale CO₂ emissions reduction.
"It is quite remarkable that clay can capture as much CO₂ as other materials that are being investigated," says Jon Otto Fossum, professor at the Department of Physics at the Norwegian University of Science and Technology (NTNU). "What we are doing is basic research. It will take more research to develop the technology, so we don’t expect clay-based CO₂  capture to be readily available anytime soon."

Norwegian University of Science and Technology researchers Leander Michels, a PhD candidate and Fossum led the research effort, in cooperation with researchers from the Institute for Energy Technology in Kjeller, Norway, and scientists from the Slovak University of Technology, the MaxIVLab at Lund University and the Universidade de Brasilia.

Selective, reusable and inexpensive

A good material for capturing CO₂ must meet specific requirements. It should have a large surface area and good adsorbtion capability. It should be able to capture CO₂ selectively before it captures other molecules, it should not need a lot of energy for it to work, and it must be reusable. Moreover, it must be inexpensive and environmentally friendly. Certain clay minerals meet these criteria, particularly smectite, a group of clay minerals that swell in contact with water, which are known as layered nanosilicates. The researchers used synthetic smectite in their experiments. Artificial clays can actually be inexpensive to make.

Clay surface actively captures CO₂
The researchers found that CO₂ in gaseous form binds to smectite, and that it is not only the smectite clay surfaces in themselves that are responsible for binding CO₂, but principally that ions associated with the clay surfaces are the active capturers. A smectite clay called lithium-fluorohectorite can retain CO₂ at temperatures up to 35 degrees C at ambient pressure. The CO₂ that is captured by the clay is released when it is heated to temperatures above this limit, which allows CO₂ capture to be controlled.

"Our experiments show that this kind of smectite can capture and retain as much CO₂ as other materials that have been studied for this purpose," Fossum says.

Citation: L. Michels,J. O. Fossum, Z. Rozynek, H. Hemmen, K. Rustenberg, P. A. Sobas, G. N. Kalantzopoulos, K. D. Knudsen, M. Janek, T. S. Plivelic&G. J. da Silva, Intercalation and Retention of Carbon Dioxide in a Smectite Clay promoted by Interlayer Cations, Scientific Reports 5, Article number: 8775 doi:10.1038/srep08775